Why Should I care about Log Home Maintenance?
We visit many log homes through the year. Something you begin to notice is the lack of maintenance on many of these homes. This is often disheartening for most customers if they look for a proposal on maintenance and be given a proposal for the restoration of their log home because the existing finish was beyond maintainable condition. The reality of the situation is this may have been avoided if proper maintenance was performed consistently.
The common maintenance cost is around $2,500 – $3,000 bi-annually. Sometimes this price is lower and sometimes it may be higher it just depends how the log home finish and sealants weathered within the last couple of years. Some owners may end up needing maintenance each year on select hotspots around your home in order to keep consitently the stain performing to its fullest.
What’s Log Home Maintenance?
Log home maintenance is the general upkeep on a log shell to make sure there is proper protection from damaging UV radiation, water damage, air infiltration, and insect and rodent intrusion. Maintenance also ensures the log cabin looks just how it did the initial day it absolutely was finished.
One element of maintenance that actually helps to increase the life of stains and sealants is an annually wash of your log home. This removes any surface contaminants such as for instance dust, pollen, bird feces, and insect remains (webs, egg sacs, skeletons, etc.) that will wear the final prematurely. Washing your home is also a good time to locate any regions of failed caulking or chinking and provide an overall assessment of the problem of the log home stain to obtain a notion of what walls or areas desire a maintenance coat of stain.
A great way to assess the problem of a log home finish is to hold back for the building to dry after being washed. Once dry you need to understand what sort of log home stain is on your building ремонт на входове. When you have an oil based stain you need to be taking a look at the knots and checks on the walls. These areas will turn blonde when the final is wearing off and this indicates that you ought to apply anyone to two maintenance coats of stain. Some oil based stains now offer a clear maintenance coat and this is actually the better approach to take but it only works if the stain isn’t worn to bare wood.
When you have a waterborne latex based stain on your building you need to be taking a look at the glossiness of the finish. Once the final is dull you should apply an obvious maintenance coat to these areas.
When caulking or chinking is failed or failing around the building you should mark these spots out and eliminate the bad regions of caulking or chinking with a knife or razor. This can allow the region behind the sealant to properly dry up since moisture was most likely the main reason the sealant isn’t sticking with the logs. Once dry apply backer rod to the log joint and apply caulk or chink to the region making sure to complement the existing caulking or chinking line. This should be achieved before applying the maintenance coat of stain if you don’t have white chinking.